Canon LV-7392A - Manual (Page 38)

38
Chapter 4 Controlling the Projector
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Aspect setting] or [Setting] and then set up each set-
ting.
Item Description
Aspect ..................... Switches the aspect mode. (Normal, Full, 16:9, Zoom, True, Natural wide*, Custom)
There may not be available mode depending on the input mode as shown in the
table below.
Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Screen aspect* .. Sets the aspect. {4:3, 16:9, Default(16:10)}
Reset......................... Resets the Screen settings.
* Natural wide and Screen aspect are only available for LV-8227A.
Input source
Aspect mode VIDEO PC
Normal 4 4
Full 4 4
16:9 4 4
Zoom 4 4
True * 4
Custom 4 4
✐ The mark " 4 " means that the available aspect mode in
the selected input source system. The error message
appears when selecting the disabled aspect mode
indicated with "*".
Aspect setting
This function is to adjust the aspect mode of the projector. The values in the text box rep-
resent the current aspect status.
Table of Aspect mode for LV-7292A, LV-7297A and LV-7392A
The picture above is only for LV-8227A model.