Canon LV-7392A - Manual (Page 40)

40
Chapter 4 Controlling the Projector
Item Description
Filter counter ...... Displays the filter counter. Reset the time
after filter clean-up. Click "Reset", a con-
firmation display appears, and then click
"OK", the time will be reset.
Filter warning..... Sets the time to indicate the filter warn-
ing message on the screen. (OFF, 2000H,
3000H, 4000H)
Factory default ... Click the "Execute" button and the
"Return to the Factory default?" confir-
mation display appears. Click the "OK"
button to set all of the projector control
items to the factory default setting except the following items.
User Logo, Log PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time
* This function is effective for all the Network settings.
Blank ........................ Sets the black out image temporarily. (ON, OFF)
Freeze ...................... Sets the image to freeze mode. (ON, OFF)
Closed caption .. Sets the closed caption function.
Closed caption ... Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color ..................... Sets the color of the contents. (Color, White)
Setting 3
Item Description
Power
management mode ... Sets into the selected power manage-
ment mode (Standby, Exit, OFF) if the
input signal is interrupted and no
control key is pressed for the specified
period of time.
* The specified time can be set 1 to 30
min.
Direct power on ... Sets the power-on mode when the AC
cord is connected to the outlet. (ON,
OFF)
Lamp mode ......... Selects lamp control mode. (High, Normal, Eco)
Key lock .................. Sets the prohibition of controls either Projector or Remote control. (OFF, Projector,
Remote control)
Fan control
............. Sets the fan control speed.
OFF Normal mode
ON1 Highland mode 1
ON2 Highland mode 2
Lamp Corres.
Value(h) .................. Displays the lamp use time (Corresponding value) . Reset the time after lamp
replacement. Click "Reset", a confirmation display appears, and then click "OK", the
time will be reset.
Setting 2