Cop y – Canon EF-M 11-22mm f4-5.6 IS STM User Manual

Page 2

Advertising
background image

4. Manual Focus

When the camera’s focus mode is set to [MF], focus manually

by turning the focusing ring. (fig.❺)

Quickly rotating the focusing ring may result in delayed

focus.

Focus mode is set using the camera. Please refer to the

camera’s instructions.

After autofocusing in [AF+MF] mode, focus manually

by pressing the shutter button halfway and turning the

focusing ring (full-time manual focusing).

5. Image Stabilizer

This lens is equipped with an Image Stabilizer. This function

corrects camera shake, allowing users to capture sharp

images. Also, the Image Stabilizer automatically provides

optimal image stabilization depending on shooting conditions

(such as shooting still subjects and following shots). Please set

the Image Stabilizer ON or OFF using the camera settings. See

your camera’s instructions for details.

The Image Stabilizer cannot compensate for a blurred

shot caused by a subject that moved.

The Image Stabilizer may not be fully effective if

you shoot from a violently shaking vehicle or other

transportation.

The Image Stabilizer consumes more power than normal

shooting, so fewer shots can be taken if you use the

function.

When shooting a still subject, it compensates for camera

shake in all directions.

It compensates for vertical camera shake during following

shots in a horizontal direction, and compensates for

horizontal camera shake during following shots in a

vertical direction.

When you use a tripod, the Image Stabilizer should be

turned off to save battery power.

Even with a monopod, the Image Stabilizer will be as

effective as during hand-held shooting.

However, depending on the shooting environment, the

Image Stabilizer effect may be less effective.

■ Dynamic IS Function (Movie shooting only)

The EF-M11-22mm f/4-5.6 IS STM is equipped with dynamic

IS, effective when shooting while walking since it expands the

IS range.
• Achieves effective IS at the wide end.

• Automatically activates when the camera is set to Movie

Shooting.

6. Hood (sold separately)

The EW-60E hood cuts out unwanted light and protects the

front of the lens from rain, snow, and dust.

To attach the hood, align the hood’s attachment position mark

with the red dot on the front of the lens, then turn the hood as

shown by the arrow until the lens’ red dot is aligned with the

hood’s stop position mark. (fig.❻)

The hood can be reverse-mounted on the lens for storage.

If the hood is not attached properly, vignetting (darkening

of the perimeter of the picture) may occur.

When attaching or detaching the hood, grasp the base of

the hood to turn it. To prevent deformation, do not grasp

the rim of the hood to turn it.

7. Filters (sold separately)

You can attach filters to the filter mounting thread on the front

of the lens.

Only one filter may be attached.

0613Ni

© CANON INC. 2013

ENG-2

Specifications

Focal Length/Aperture

11-22mm f/4-5.6

Lens Construction

9 groups, 12 elements

Minimum Aperture

f/22-32

Angle of View

Diagonal: 102°10'-63°30'

Vertical: 68°55'-37°50'

Horizontal: 91°50'-54°30'

Min. Focusing Distance

0.15 m/0.49 ft.

Max. Magnification

0.3x (at 22 mm)

Field of View

Approx. 103x155-50x74 mm/

4.06x6.10-1.97x2.91 inch

(at 0.15 m/0.49 ft.)

Filter Diameter

55 mm

Max. Diameter and Length

(When the lens is retracted) 60.9x58.2 mm/2.40x2.30 inch
Weight

Approx. 220 g/7.8 oz

Hood

EW-60E (Sold Separately)

Lens Cap

E-55

Dust Cap

Lens Dust Cap EB

Case

LP814 (Sold Separately)

• Equivalent to 18-35 mm in the 35mm film format.

• The lens length is measured from the mount surface to the

front end of the lens. Add 20.2 mm when including the lens

cap and dust cap.

• The size and weight listed are for the lens only, except as

indicated.

• Extenders cannot be used with this lens.

• Aperture settings are specified on the camera. The camera

automatically compensates for variations in the aperture

setting when the camera is zoomed in or out.

• All data listed is measured according to Canon standards.

• Product specifications and appearance are subject to change

without notice.

COP

Y

Advertising