Setting the date and time – Canon PowerShot D20 User Manual
Page 4
Initial Preparations
4
Check the card’s write-protect tab
and insert the memory card.
z
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
z
Insert the memory card facing as shown until
it clicks into the locked position.
z
To remove the memory card, push it in until
you feel a click, and then slowly release it.
Close the cover.
z
Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.
z
Make sure the lock returns to the position
shown, with the red mark no longer visible.
Turn the camera on.
z
Press the ON/OFF button.
X
The Date/Time screen is displayed.
Set the date and time.
z
Press the
qr buttons to choose an option.
z
Press the
op buttons to specify the date
and time.
z
When finished, press the
m button.
Label
Red Mark
Setting the Date and Time
GS_EN.fm Page 4 Tuesday, March 6, 2012 10:57 AM