Canon imagePROGRAF iPF8400 - Manual (Page 37)

Executing Color Check
Executing Color Check
When a color check is executed, a built-in pattern is printed, the color difference from a calibration target registered in
the printer is calculated, and the check results are displayed.
Note
This step can be executed when a printer that has a spectrophotometer unit installed is selected.
When printing the color check adjustment pattern, the calibration adjustment values are applied even if Use Adj.
Value is set to Disabled in the Control Panel menu.
Setting the Color Check Threshold Value
1
Double-click the printer you want to execute the color check on in the Printer list.
37