Canon imagePROGRAF iPF9400 - Manual (Page 43)

Replacing the Cutter Unit
1
Open the Top Cover.
2
If the Cutter Unit or Carriage Cover is dirty, use a damp cloth that you have wrung out completely to wipe it
clean.
Important
• Do not touch the Linear Scale (a), Carriage Shaft
(b), or Fixed Blade (c). This may stain your
hands and damage the printer.
3
Push the Cutter Unit Detachment Lever to the left to
unlock it.
iPF9400 Replacing the Cutter Unit
Basic Guide
Consumables and Maintenance
Cutter Unit
43