Canon LV-8320 - Manual (Page 20)

LV-8320 Basic Serial Command Specifications
-17-
6.52. Computer 1 Scart Command
Command “C51” [CR]
Detail
Select Scart input in Computer 1
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1 or On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.53. Computer 1 Component Command
Command “C54” [CR]
Detail
Select Component input in Computer 1.
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1 or On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.54. AUTO PC ADJ. Command
Command “C89” [CR]
Detail
Execute Auto PC function.
This command operates the same as “AUTO PC” of main menu.
Projector suspends Auto PC operation when receiving this command another
time.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.55. PRESENTATION TIMER Command
Command “C8A” [CR]
Detail
Execute Presentation Timer.
This command works the same way as “P-TIMER” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.56. PRESENTATION TIMER (Exit) Command
Command “C8B” [CR]
Detail
Exit Presentation Timer menu.
This command works the same as holding on the “P-TIMER” button of the remote
control
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.57. KEYSTONE ↑Command
Command “C8E” [CR]
Detail Correct keystone distortion by reducing upper part of image.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]