Messages regarding paper
MediaType Mismatch ...................................................................................................................................... 812
The paper is too small. .................................................................................................................................... 813
The paper is too small. .................................................................................................................................... 813
PaprWidth Mismatch ....................................................................................................................................... 814
Paper size not detected. ................................................................................................................................. 815
Insufficient paper for job ................................................................................................................................. 816
This paper cannot be used. ............................................................................................................................ 816
Roll printing is selected. .................................................................................................................................. 816
Roll printing is selected, but sheets are loaded. ............................................................................................ 817
The roll is empty. ............................................................................................................................................. 817
Sheet printing is selected. .............................................................................................................................. 818
Regular printing is selected, but a roll is loaded. ........................................................................................... 818
Paper jam ........................................................................................................................................................ 818
Paper is crooked. ............................................................................................................................................ 819
Paper not aligned with right guide. ................................................................................................................. 820
Cannot detect papr ......................................................................................................................................... 820
Paper cutting failed. ........................................................................................................................................ 820
End of paper feed. .......................................................................................................................................... 821
Rel lever is in wrong position. ......................................................................................................................... 821
Borderless printng not possible. ..................................................................................................................... 821
Paper position not suitable for borderless printing. ........................................................................................ 822
Roll paper is not securely in contact with roll holder. ..................................................................................... 822
MediaType Mismatch
Cause
Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.6
(See "Loading and Printing on Sheets.")
→P.9
You tried to print a test pattern for print-
er adjustment on several sheets, but
sheets of different types of paper were
used.
When printing a test pattern for adjustment, use sheets of the same type of
paper, in the required quantity. Replace the paper as follows and perform
adjustment again.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Replace the paper.
(See "Loading and Printing on Sheets.")
→P.9
3.
Execute adjustment again from the control panel menu.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
Error Message
>
Messages regarding paper
>
MediaType Mismatch
iPF650
12
812