Canon PowerShot ELPH 115 IS - Manual (Page 212)

212
ç Contents ç Chapter Contents
• When you are in the vicinity of an access point that you
have previously connected to, the camera will automatically
connect to it in step 3. To change access points, select
[Switch Network] from the screen that will be displayed
when the connection is being established, and follow steps
4 – 5 in “Adding a Computer” ( = 219 ).
• All camera images can be viewed from the connected
smartphone when you choose [Yes] in step 7. To keep
camera images private, so that they cannot be viewed
from the smartphone, choose [No] in step 7.
• You can connect to smartphones that you have already connected
to by choosing them on the [Select a Device] screen in step 3.
• After you have accessed the Wi-Fi menu once, you can access
it again by pressing the < o> button. The recent target device
is listed first, so you can easily connect again by pressing the
< o><p> buttons to choose it. To add a new device, display the
device selection screen by pressing the < q><r> buttons, and then
configure the setting.
If you prefer not to display recent target devices, press the
< n> button, and on the [3] tab, choose [Wi-Fi Settings] >
[Target History] > [Off].
• The image quality level for movies that can be sent may differ
depending on the smartphone. Refer to the instruction manual
provided with your smartphone for details.
• To add multiple smartphones, repeat the above procedures starting
from step 1.
• To change privacy settings for smartphones added to the list,
choose the smartphone whose settings you want to change from
[Edit a Device] in step 3, and then choose [View Settings].