Adesso NUSCAN 3200 series User Manual
Page 14
12. Programming Guide
If you need to make changes in the configuration of the scanner for specific
applications, a full Programming Guide can be downloaded at:
13. Trouble Shooting
a. Problem: Nothing happens when you follow the operating instructions.
Possible Cause
Possible Solution
Interface cables are
loose.
Check for loose cable connections.
b. Problem: Light comes on, but symbol does not decode.
Possible Cause
Possible Solution
Scanner is not
programmed for the
correct bar-code
type.
Please refer User’s Guide and be sure to select the
correct interface selection and ensure that the
scanner is programmed to read the type of barcode
you are scanning.
Barcode symbol is
unreadable.
Check the symbol to make sure it is not de-faced. Try
scanning test symbols of the same barcode type.
Distance between
scanner and barcode
is incorrect.
Move the scanner closer to or further from the
barcode.
c. Problem: Symbol is decoded, but not transmitted to the host.
Possible Cause
Possible Solution
Scanner is not
programmed for the
correct host type.
Please make sure the scanner is configured to the
appropriate host type by scanning the corresponding
programming barcode on the User’s Guide.
11