Canon Color imageCLASS MF8280Cw - Manual (Page 14)

14
Troubleshooting
When an Error Message Appears
Action
• Wait for a while and try again.
Action
• Check that the wireless router that you are using supports WPS function.
If the wireless router is WPS capable:
Check network connection referring to “Cannot Connect to the Network” (P.18).
If the wireless router is not WPS capable:
Manually select a specific wireless router for your network identification. (P. 6)
Action 1
• Wireless router’s push button might
not be pressed in the time limit.
Repeat the setup with the proper
procedure.
Action 2
• The correct SSID might not be
entered. Confirm the wireless
router’s SSID and repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18). If the
access point cannot be determined even after checking the network connection,
check the security settings on the wireless router.
Action
• Turn OFF the machine and turn it back ON, and then repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18). If the
access point cannot be determined even after checking the network connection,
check the security settings on the wireless router.