Canon imageCLASS MF5960dn - Manual (Page 10)

10
1.
Pull out the paper drawer.
Attach the Optional Drawer to the machine
Take the drawer from the carton, and remove all packing materials, including shipping tape before attaching
the optional drawer to the machine. Make sure the machine and the optional drawer are facing in the
same direction when being attached.
Loading Paper
2.
Slide the paper guides, and load the paper.
While holding the lock release lever (A), adjust the paper guides.
Match the paper guides with the size of the paper that is loaded.
When changing the size of the paper to be loaded
Be sure to set the paper size.
At factory shipment, the machine’s default settings
have LTR for paper size and Plain for paper type.
Proceed to“Setting a Paper Size and Type” on p.13.
(A)
(A)
NOTE
When moving the main unit, be sure to carry it from
front side by using the provided hand grips on the
left and right sides, as seen in the illustration.