Canon Color imageCLASS MF8280Cw - Manual (Page 11)

11
Connecting the Power Cord
Preface Installing the Machine
2 1
Connecting to a Computer and Installing the Drivers
3
Configuring and Connecting the Fax
4
Press [▲] or [▼] to highlight a
language, and then press [OK].
Select whether or not to connect using wireless LAN immediately.
Press [▲] or [▼] to highlight a
region, and then press [OK].
3 4
9
• Press [◀] or [▶] to move the
cursor to the left and right.
• Press [▲] or [▼] to
change the numeric
value, or AM/PM.
The factory default settings for
time display is set as 12-Hour.
Enter the date and time, and then press <Apply>.
Press [▲] or [▼] to
highlight your time zone * ,
and then press [OK].
7 6
Connect to the computer via a
wireless LAN immediately.
Proceed to the next page.
• Select <No> if you want to connect the machine to a
computer via a wireless LAN later. When connecting,
refer to Wireless LAN Setting Guide.
• If you do not connect the machine to a computer,
proceed to fax configuration (P. 24).
Start from step  on P. 4 in Wireless LAN Setting Guide.
* The time zone setting indicates the time difference between your local time zone and Coordinated Universal Time (UTC). The correct time
zone setting is required for Internet communications.