Cop y – Canon PowerShot N User Manual

Page 94

Advertising
background image

94

1
2
3
4
5
6

8
9
10

Cover

Preliminary Notes and
Legal Information

Contents: Basic
Operations

Camera Basics

Creative Shot
Mode

Auto Mode/
Hybrid Auto Mode

Other Shooting
Modes

Playback Mode

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

7

Advanced Guide

Wi-Fi Functions

The following Windows settings are configured when you run the utility in step
2.

-

Turn on media streaming.
This will enable the camera to find the computer to access via Wi-Fi.

-

Turn on network discovery.
This will enable the computer to find the camera.

-

Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.

-

Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.

Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.

Adding a Computer

Add a computer to your list of devices to connect to via Wi-Fi.
Follow these instructions when using a Wi-Fi Protected Setup (WPS)
compatible access point to establish a push-button connection.
If your access point is not WPS-compatible, establish a connection as
described in “Connecting to Access Points in the List” (

=

96).

WPS makes it easy to complete settings when connecting devices over Wi-Fi.
You can use either Push Button Configuration Method or PIN Method for
settings on a WPS supported device.

Refer to the user guide provided with your access point to check if it supports
WPS.

Be sure to also read the user guide included with your access point.

1

Access the Wi-Fi menu.

z

z

Touch [

] (

=

88).

2

Choose a computer.

z

z

Touch [

].

3

Choose [Add a Device].

z

z

Touch [Add a Device].

X

X

A list of detected access points will be
displayed in the [Select Network] screen.

COP

Y

Advertising
This manual is related to the following products: