Install the printheads – Canon imagePROGRAF iPF8400S User Manual

Page 5

Advertising
background image

5

Install both printheads.

Install the Printheads

1

When the display screen shows Open

top cover., open the top cover.

Instructions on printhead installation are

shown on the display screen.

2

Lift the carriage cover to open it fully.

3

Pull the printhead fixer lever forward all

the way to open it completely.

4

Lift the printhead fixer cover to open it fully.

5

Hold the printhead by the grips (a) as you

remove it from the pouch.

a

a

.

6

Remove the orange protective part (a).

Remove the other orange protective part

(b) while holding the grip (c).

a

b

c

7

Insert the printhead into the carriage (b)

with the ink holes (a) up and facing the

front of the printer as shown in the figure.

Carefully push the printhead firmly into

the carriage (b), ensuring that the parts

that were covered by the protective parts

do not touch the carriage (b).

a

b

8

Pull the printhead fixer cover down toward

the front to lock the printhead in place.

9

Push the printhead fixer lever all the way

back.

10

Repeat steps 3 to 9 to install the second

printhead set.

11

Pull the carriage cover forward.

12

Close the top cover.

• Never touch the parts covered by the

protective parts. Doing so may damage

the printhead and affect printing quality.

• The printhead contains ink, so be

careful not to spill it once the protective

parts are removed.

• Do not reattach the protective parts

after removing them. Dispose of these

materials according to local regulations.

Advertising