Rotating images, Using the menu – Canon PowerShot ELPH 140 IS User Manual
Page 69
69
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
2
Choose an image.
z
z
Once you choose an image following
step 2 in “Choosing Images Individually”
(
), [
] is displayed.
z
z
To cancel selection, press the <
m>
button again. [
] is no longer displayed.
z
z
Repeat this process to specify other
images.
3
Erase the image.
z
z
Press the <
n> button. A confirmation
message is displayed.
z
z
Press the <
q><r> buttons to choose
[OK], and then press the <
m> button.
Specifying All Images at Once
1
Choose [Select All Images].
z
z
Following step 2 in “Choosing a Selection
Method” (
), choose [Select All
Images] and press the <
m> button.
2
Erase the images.
z
z
Press the <
q><r> buttons to choose
[OK], and then press the <
m> button.
Still Images
Rotating Images
Change the orientation of images and save them as follows.
1
Choose [
\].
z
z
Press the <
m> button, and then choose
[
2
Rotate the image.
z
z
Press the <
q> or <r> button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the <
m> button to complete
the setting.
Using the Menu
1
Choose [Rotate].
z
z
Press the <
n> button and choose
[Rotate] on the [
1] tab (
).