Specifications, Specifications -3, Introduction – Alamo 60C User Manual
Page 27
INTRODUCTION
60C 01/10
Introduction Section 2-3
© 2010 Alamo Group Inc.
INTRODUCTION
SPECIFICATIONS
Specifications may vary depending on tractor model, tire size and bucket used and are subject to change without
notification. Tractor must be equipped with ROPS and seat belt that will provide greater safety and installation of backhoe
subframe.
GENERAL DATA
A.
Digging Depth (two foot flat bottom) ...............................................72.5”
B.
Reach from center line of Swing Pivot............................................101”
C.
Loading Height (bucket at 60°) .......................................................59”
D.
Swing Arc .......................................................................................150°
E.
Transport Height (maximum) ..........................................................65”
F.
Transport Overhang........................................................................40”
G.
Bucket Rotation ..............................................................................180°
H.
Stabilizer Spread, down position.....................................................76”
I.
Stabilizer Spread, up position .........................................................49”
J.
Backhoe Weight..............................................................................625 lbs.
K.
Shipping Weight (less bucket) ........................................................700 lbs.
BUCKET DATA
BUCKET WIDTH
SAE STRUCK CAPACITY
SAE HEAPED CAPACITY
9”
0.48 cu. ft.
0.54 cu. ft.
12”
1.65 cu. ft.
0.75 cu. ft.
16”
1.88 cu. ft.
1.03 cu. ft.
CYLINDER DATA
CYLINDER
PISTON DIA.
STROKE
RETRACTED
EXTENDED
ROD DIA.
LENGTH
LENGTH
Boom
2.5”
12.37”
20.44”
32.82”
1.375”
Dipperstick
2.5”
12.01”
20.25”
32.26”
1.375”
Bucket
2.25”
13.87”
21.25”
35.12
1.375”
Swing
2.5”
8”
15.22”
23.22”
1.375”
Stabilizer
2.25”
10.66”
17.44”
28.09”
1.375”