Audiovox CDM-4000 - Manual (Page 60)

60
In areas where your Carrier has Roaming agreements,
your phone will display a steady “ Rm ” indication. If your
display indicates a flashing “
Rm
”, you are in a cellular
system which is not associated with your Carrier (you
can still make or receive calls).
If your display indicates “(No Service)”, you may have to
change your A/B System Selection or NAM Selection in
order to obtain service. If your display indicates “No Ser-
vice”, you are in an area where there is no cellular service.
NAM Selection (F52)
Some Cellular users may find it beneficial to register
their phones with multiple numbers, for different cities
where they may frequently travel. To provide this ability,
your phone has two NAMs (Number Assignment Mod-
ules) enabling up to two registrations.
If you have multiple registrations, the NAM Selection
feature enables you to change the NAM being used by
your phone. Do not use this feature, if you do not have
multiple registrations.
To change NAMs:
1. Press F 5 JKL 2 ABC
.
2. You can change the current NAM by or .
3. Press F to set.
Force Analog Call (F53)
This feature temporarily directs the phone to use the
Analog Mode even if the Digital Mode has been previ-
ously selected.
1. Press F 5 JKL 3 DEF
.
2. Press F when scanning the Analog Mode.
Notes: This feature automatically ends if:
1) The phone is turned off.
2) An outgoing call is made.
3) An incoming call is received.
4) After 10 minutes if items 1) ~ 3) did not occur.