American DJ DCD-PRO450 - Manual (Page 8)

American DJ
®
AUDIO • DCD-PRO450™ INSTRUCTIONS MANUAL • PAGE 8
B. LCD Display (figure 12)
31. SINGLE INDICATOR - This will indicate the player is
in "SINGLE" play mode.
32. Function indicators - These indicators detail which
effects or cue points are selected.
33. CUE INDICATOR - This indicator details cue mode
has been activated
34. PLAY INDICATOR ( ) - The PLAY indicators will
glow during normal playback.
35. PAUSE INDICATOR ( ) - The PAUSE indicators
will glow during pause or cue mode.
36. TRACK INDICATOR - This will display the current
track in play, pause, and cue mode or the current track
being programmed in program mode.
37.PROGRAM INDICATOR - This indicator will glow
when program mode is activate or program play has
been activated.
38. REPEAT Indicator - (REPEAT 1, REPEAT ALL) The
REPEAT indicator will detail complete disc repeat play.
REPEAT 1 will indicate single track repeat play.
39. MINUTES INDICATOR - Detail the minutes elapse
or remaining.
40. SECOND INDICATOR - Detail the seconds elapse
or remaining.
41. Frame INDICATOR - Detail the frames elapse or
remaining.
42. PITCH OR BPM DISPLAY - Details either beat per
minute or applied pitch percentage (see also 24 & 25).
43. BPM INDICATOR - Will glow when the BPM BUT-
TON (24) is engaged. This will also detail the value
detailed in section 42 is in BPM's
44. PITCH INDICATOR - Will glow when the PITCH
BUTTON (25) is engaged. This will also detail the value
detailed in section 42 is in pitch percentage.
45.ELAPSED, TOTAL, & REMAIN INDICATORS - These
indicate that the time shown on the display is either
in ELAPSED, TOTAL disc remaining, or SINGLE song
remaining time.
46. LOOP, RELOOP - Appears when LOOP is engaged.
LOOP will flashes when a loop is engaged.
CONTROLS AND FUNCTIONS - LCD DISPLAY
32
31
37 38
33
34
35
39 40 42
45
44
43
46
Fig. 4
36
41