Canon imageFORMULA DR-C125 Document Scanner - Manual (Page 27)

27
How to Place Documents
Switching the Feed and Eject
Methods
Use the two levers on the scanner to switch the feed and eject
methods based on the type of document you are scanning.
The feed and eject methods and lever positions for each document
type are as follows.
Placing Documents for Standard
Feeding
Ordinarily, standard feeding should be used when scanning multiple
documents of a standard size at one time. Standard feeding enables
the multiple documents to be fed while separating each page.
1
Open the document feed tray.
2
Pull out the feed support.
Document type
Feed method (lever
position) Eject method (lever
position)
Standard paper
and business
cards
Standard feeding
(lower) U-turn path (upper) or
straight path (lower)
Plastic cards, thick
paper, thin paper,
and bound or
fastened paper
Non separation
feeding (upper)
Straight path (lower)
Feed Selection Lever
Standard Feeding
Eject Selection Lever
U-turn Path Straight Path
Non Separation
Feeding
0-00-DR-C125_RG_UK.book Page 27 Thursday, September 8, 2011 6:03 PM