Canon VB-C60 - Manual (Page 19)

2-3
VK-Lite System Installation Example
VK-Li
te Ins
tal
lati
on
Step 1: Preparation
Calculate how much free hard disk space will be required for the storage server from the recording conditions
to ensure that the system can operate stably.
The amount of hard disk space required can be calculated using the following formula.
The amount of free hard disk space required is therefore over 166 GB. However, this value does not include the
space required in the system area.
Step 2: Camera Server Installation and Setup
Configure initial camera server settings, such as the IP address setting.
See Start Guide for details of initial camera server settings.
Required free hard disk space
= No. of cameras x Video data size x Recording frame rate x Video retention period
(sec.)
= 4 x 35.8 x 1 x (60 x 60 x 24 x 14)
173214720 KB
166 GB
Note
Do not use an external hard drive to store recorded video data. The video may not be recorded properly or
the data may be corrupted.
Reference
 "System Design Concept" in Administrator’s Manual
Tip
When you use presets and preset tours, it is recommended to complete camera server settings in advance,
so that you can build the system more efficiently.
Reference
Initial camera settings
 Start Guide
Preset settings  "Preset Setting Tool" in Operation Guide
~
~
~ ~