Canon i-SENSYS MF8230Cn - Manual (Page 12)

12
En Choosing the Method to Connect the
Machine to the Computer
● Connecting via a Wired LAN
See “Connecting via a Wired LAN”
You can connect the machine to the computer through
a wired LAN router. Use a LAN cable to connect the
machine to the router.
• Make sure that there are ports available on the router to
connect the machine and the computer.
• Have a Category 5 or higher twisted pair LAN cable ready.
● Connecting via a USB cable
See “Connecting via a USB Cable”
You can connect the machine to the computer using a
USB cable.
● Connecting via a Wireless LAN (MF8280Cw Only)
See Wireless LAN Setting Guide.
You can connect the machine to the computer through
a wireless router*. Since it is connected to wireless, no
LAN cables are needed.
* A wireless router, which supports IEEE 802.11b/g/n, is required.
If you are not sure whether your router is wireless
or wired:
See the instruction manual provided with your network
device, or contact the manufacturer.
Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically configured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual “Network” ▶ “Connecting to a Network” ▶
“Setting IP Addresses”
2
Install the driver and software using the User
Software CD-ROM.
Proceed to “Setting a Paper Size and Type” (P.13).
Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers and
the MF Toolbox.
1
Install the driver and software using the User
Software CD-ROM .
2
Connect the USB cable.
Proceed to “Setting a Paper Size and Type” (P.13).
For details on the installation procedures:
See MF Driver Installation Guide