AT&T 984 - Manual (Page 4)

4
Table/desk installation
continued from page 3
3. Connect the power adapter to the telephone.
Use only the power adapter provided with this product.
To obtain a replacement, call
1 (800) 222–3111 .
Plug one end of the power adapter into the jack labeled POWER
on the back of the phone. Plug the other end into a standard
electrical outlet not controlled by a wall switch.
4. Initialization.
If no battery is installed when you connect the power cord, the phone
runs a quick self-test and the screen displays
Initializing for about
seven seconds.
NOTE: The phone will run through this same initialization any time it is
reconnected to AC power if a working battery is not installed (for example,
after a power failure or when the unit has been unplugged).
5. Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial
tone, please see In case of difficulty beginning on page 121 of your
User’s Manual, Part 2 for details.
Standard
electrical
outlet
Power adapter
Power jack
984QSG_(Rev6)ml23.05.06 5/23/06 11:27 AM Page 4