Avaya 3616 - Manual (Page 14)

Avaya 3616 Wireless Telephone and Desktop Charger
with CCMS
Page 14 555-301-709
Issue 2
Setting User Preferences
When the Wireless Telephone is in standby mode (on but
not in use), press and briefly hold FCN to display user
options. Check with your system administrator for specific
features supported by your Wireless Telephone.
► (Right arrow) displays next menu item.
◄ (Left arrow) displays previous menu item.
0 (Zero) selects or changes item.
FCN returns to previous menu level.
Power Off/End Call exits menus
User Option Menu
Action:
Ring Type Select Telephone Ring to set the
standard ring on the Wireless
Telephone.
Normal: is the factory default ring.
Vib/norm ring: vibrates for 5
seconds and then rings.
Vibrator ring : vibrates for a non-
audible call alert.
Press 0 to select
desired ring type. The
ring type currently set
displays with an
asterisk.
High Noise Mode Adjusts the Wireless Telephone to
account for background noise.
Normal : for most office
environments
High : for moderate background
noise
Severe : for extremely noisy
conditions.
Select an option that
describes the noise in
your environment.
Current IP address In IP systems, the IP address of the
Wireless Telephone is displayed.
This number may not be edited. None
Extension This number is used to identify the
Wireless Telephone and is for
display purposes only. Use keypad to enter
extension number.
(Additional options may be present. Contact your system administrator for information.)