Asus M2NC61S - Manual (Page 4)

4 Installation manual
Removing the side cover and
front panel assembly
1. Remove the cover screws on the rear panel.
2. Pull the side cover toward the rear panel until its hooks disengage
from the chassis tabs. Set the side cover aside.
3. Locate the front panel assembly hooks, then lift them until they
disengage from the chassis.
4. Swing the front panel assembly to the right, until the hinge-like tabs
on the right side of the assembly are exposed.
5. Remove the front panel assembly, then set aside.
Installing a CPU
To install a CPU:
1. Locate the CPU socket,then
lift the socket lever to a 90º-
100º angel.
4
1 Air duct
1
2
2
3
4
4
4
3
3
Chassis tab holes
4