Ice maker information, Ice maker specifications, Ice maker connector plug connections – Electrolux EW26SS85KS User Manual

Page 2

Advertising
background image

242164701

ELECTROLUX SxS

TU

R

N

Mounting

Plate

Screws

Mounting

Plate

Screw

Motor
Gear

Timing

Gear

Water Fill
Adjustment

Ice Maker

ON/OFF
Switch

ICE MAKER INFORMATION

Test Cycling

Press the momentary contact on the ON/OFF switch for approximately 15 seconds. Ice maker will continue
to complete the cycle.

Water Fill Volume

The water fill can be adjusted without removing the
ice maker cover. To adjust the fill size, remove the
small round plug next to the On/Off Switch. Insert
a #2 Phillips screwdriver into the hole about an inch
or until it engages the Water Fill Adjustment Screw.
Turn the screw clockwise to reduce the fill size; turn
the screw counterclockwise to increase the fill size.
One turn equals approx 20cc (0.68 oz). The correct
fill is 85 to 95cc (2.75 to 3.25 oz). When a water
valve is replaced, check the fill volume.

ICE MAKER SPECIFICATIONS

Electrical

115 vac (127 vac max)

Thermostat

Opens at 48° F ( 9° C), Closes at 9° F ( -13° C)

Heater Wattage

112 watts

ICE MAKER CONNECTOR PLUG CONNECTIONS

Wire Number

Wire Color

Connects to:

1

Green/Yellow

Ground

2

Yellow

Water Valve

3

Black

Line

4

Light Blue

Neutral

Advertising
This manual is related to the following products: