Electrolux EW30DS75KS - Manual (Page 51)

51
Double ring burner cap
The glass in the double ring is designed to fit
loosely. Clean with normal non abrasive glass type
cleaner and thoroughly dry before replacing.
Burner heads
Lift the burner cap from the burner head. The
surface burner heads are secured to the cooktop
and must be cleaned in place.
For proper gas flow it may be necessary to clean
the burner heads and slots. To clean, first use a
clean DAMP cloth to soak up any spills. Remove
any food from between the burner slots using a
small nonabrasive brush like a toothbrush and
afterwards wipe using a damp cloth. For stubborn
soils located in the slots, use a small-gauge wire or
needle to clean.
Should you experience ignition problems it may be
that an ignition port hole is partially blocked with
soil (see figs 1 & 2). With the burner head in place,
use a small wire gauge needle or the end of a
paper clip to clear the ignition port or ports.
Figure 1 - Cooktop burner head
(All burners except Double ring burner)
Figure 2 - Double ring burner head
(Models equipped with double ring burner only)
Slots
Ignition port
Orifice port
Slots
Ignition
port
Orifice
port
Orifice
port
Cleaning cooktop, burner
grates, caps and heads
Care and Cleaning