Aastra Telecom 9110 - Manual (Page 11)

10
Memory keys
Memory keys
Saving numbers into memory keys
You can save up to 7 speed dial numbers of your customers, business associates, or anyone
you call frequently in 9110’s seven memory keys.
Note: In some operating environments, these steps must be completed within
20 seconds or the line will briefly disconnect. The telephone will not store
digits to memory if this occurs and you will have to repeat the steps
above to save to a memory key.
Labeling the memory keys
Your Memory key card has label identification spaces (shaded in grey) for each of the
seven programmable memory keys. Write the name of the autodialer or feature on
these spaces when you program a memory key.
To save a telephone number in a memory key:
1. Lift the handset or press
c
(the dial tone signal will continue
while you save).
2. Press
K
. You will hear a two tones.
3. Press the desired memory key you wish to store the number to.
You will hear one tone.
4. Use the dialpad to enter the number. You can enter any number up to 30 digits.
If you need to enter a 2 second pause (between your voice mail number and a
password, for example) press the
O
key. To program a number or code that
uses Flash, press the
a
key.
5. Press
K
to save the number into the memory key. You will hear two tones.
6. Hang up the handset or press
N
.
Redial
Save
Flash
Mu te
9110 E2 UG.fm Page 10 Friday, May 21, 2004 9:39 AM