Electrolux EI30DD10KS - Manual (Page 9)

9
Plan the Electrical Connection
The downdraft blower system draws 4 AMPS and
requires a 120 VAC, 60 Hz circuit.
The unit has a 28 inch long power cord with a 3
pronged grounded plug. Plan to provide a grounded
outlet in a location which will allow the unit’s power
cord to reach.
Recommended
Electrical Outlet
Locations
(All Shaded Areas)
All vertical dimensions relative to top surface of the
countertop.
All horizontal dimensions relative to cutout in the
countertop.
Ensure that access to the electrical outlet will not
be blocked by the ducting after installation.
Electrical Outlet Location
Model M - From Center
EI30DD10SK 13 ½” (34.3 cm)
EI36DD10SK 16 ½” (42.0 cm)
7-7/8”
(20 cm)
8-3/4”
(22.2 cm)
M M
6-1/2”
(16.5 cm)
19-1/16”
(48.4 cm)
23-3/4”
(60.3 cm)
4-5/8"
(11.8 cm)
9-1/2"
(24.1cm)
14-3/4"
(37.5 cm)
22-1/8"
(56.2 cm)
Install Electrical Supply Outlet
- Mount a standard wiring box, with 3-pronged
grounded receptacle, inside the cabinet. Make sure
the downdraft’s power cord can easily reach it.
- Run appropriate power cable into cabinet and
connect it to receptacle.
NOTE
If the 30” model is being installed in a 30” wide
cabinet or the 36” model in a 36” wide cabinet,
the outlet cannot be located on the back wall of
cabinet.
Outlet may also be wall-mounted with access hole
in cabinet.
Planning