Additional spin options, 3 prewash, 4 delay start – Electrolux EWF1286ODW User Manual

Page 10: 5 extra rinse, 6 hot and cold, 7 time manager

Advertising
background image

Additional spin options:

No Spin
• Set this option to remove all spin pha-

ses.

• Set it for very delicate fabrics.
• The rinse phase uses more water for

some washing programmes.

• The display shows the indicator

.

Rinse Hold
• Set this option to prevent the laundry

creases.

• The washing programme stops with the

water in the drum. The drum turns reg-
ularly to prevent the laundry creases.

• The door stays locked. You must drain

the water to unlock the door.

• The display shows the indicator

.

To drain the water refer to ‘At the
end of the programme’.

Extra Silent
• Set this option to remove all spin pha-

ses and to perform a silent washing.

• The rinse phase uses more water for

some washing programmes.

• The washing programme stops with the

water in the drum. The drum turns reg-
ularly to prevent the laundry creases.

• The door stays locked. You must drain

the water to unlock the door.

• The display shows the indicator .

To drain the water refer to ‘At the
end of the programme’.

7.3 Prewash

With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.

7.4 Delay Start

With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.

7.5 Extra Rinse

With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to de-
tergents and in areas where the water is
soft.
The related indicator comes on.

7.6 Hot and cold

Two inlet hoses are supplied with the ap-
pliance : one for the cold water and one
for the hot water.
Turn the knob clockwise and set one of
the first 3 washing programmes, the rela-
ted indicator comes on.
The hot water connection is on.
The appliance fills with hot water from
your domestic hydraulic system.
To wash with cold water only, press

to

deactivate the hot water connection. the
related indicator goes off.
The cold water is warmed up by the heat-
ing element of the appliance.

7.7 Time Manager

When you set a washing programme, the
display shows the default duration.
Press or to decrease or increase the
programme duration.
The Time Manager is available only with
the programmes in the table.

Indi

cator

Eco

1)

2)

2)

2)

10 www.electrolux.com

Advertising