Altinex TNP100UN - Manual (Page 4)

ACCESSORIES
3
the user will be required to correct the
interference at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
ABOUT YOUR TNP100UN 2
The TNP100UN is designed for installation into a
conference room table. The Tilt ‘N Plug™
Interconnect Box (TNP100UN) provides a means of
connecting audio, video, control, and computer video
sources into a presentation system. It is ideal for use
together with ALTINEX computer video interfaces.
The Tilt ‘N Plug™ Interconnect Box can either pop up
and “tilt” to a raised position to provide access to the
connectors or it can be lowered into a table when not
in use. A pneumatic shock inside the TNP100UN’s
tower type construction applies pressure to the panel
mechanism, making it easy to raise and secure the
unit firmly in an open position. Also, for safety, the
chassis of the TNP100UN is connected to the ground
pin of the power plug.
The Tilt ‘N Plug™ Interconnect Box provides easy
access to system inputs when they are needed. It
also removes system inputs when not needed,
eliminating the obstruction. The Tilt ‘N Plug™
Interconnect Box has one input plate on the front
panel of the unit. The standard plate offers Computer
Video (15-pin HD); Composite Video (RCA), Audio
(RCA), Computer Audio (Stereo Mini), Modem (RJ-
11), 9-pin D-type RS-232 and Network (RJ-45) input
connections. All signals are passed through to a set
of female connectors or cables. Several optional
connectors can be substituted for the standard set of
connectors.
The Tilt ‘N Plug™ Interconnect Box is designed for
use with tables ranging from one to three inches
thick. It offers an optional mounting bezel to secure
the unit flush with the table’s surface. The Tilt ‘N
Plug™ comes in a standard matte black color. The
top of the unit can be finished to match the table or it
can be painted another color. This is available on a
custom per order basis at an additional charge.
TECHNICAL SPECIFICATIONS 3
FEATURES/
DESCRIPTION
TNP100UN
GENERAL
Front Panel
Standard
Configuration
Connectors
Faceplate
Cable end
under table
Power
1 universal
outlet with two
5A circuit
breakers
1 universal plug
with 6ft cord
Computer Video 1 15-pin HD-F 1 15-pin HD-F
Composite Video 1 Yellow RCA-F 1 Yellow RCA-F
Audio, left, right 1 Black, 1 Red
RCA-F
1 Black, 1 Red
RCA-F
Audio 1 3.5 mm stereo
female plug
1 3.5 mm stereo
female plug
Telephone 1 RJ-11 F (6-
position)
1-RJ-11-M (6-
position)
Network 1 RJ-45-F (8-
position)
1 RJ-45-M (8-
position)
Control 1 DB-9 F 1 DB-9 F
Table 1. TNP100UN General
Mechanical TNP100UN
Width (inches) 6.05in (154mm)
Height (closed) 4.79in (122mm)
Height (opened) 8.05in (205mm)
Depth (inches) 7.560 (192mm)
Finish Flat Black
Operation
T
°
Operating 10
°
C-35
°
C
T
°
Maximum 50
°
C
Humidity 90
%
non-condensing
Table 2. TNP100UN Mechanical
Power TNP100UN
Power Rating (pass
through connector) 220-240V~5A,
50/60Hz
Table 3. TNP100UN Electrical