Electrolux ERN3313AOW - Manual (Page 14)

7. INSTALLATION
7.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the door, you must ensure that it
is made unusable to prevent
young children being trapped in-
side.
The appliance shall have the plug
accessible after installation.
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
7.2 Electrical connection
Your appliance must be connected to a
single-phase supply of 230 V. Check that
the electricity meter is suitable for the
power consumed by your appliance, al-
lowing for the other connected applian-
ces. Rating of the in-line fuses (one per
phase): 10 A at 230 V.
Installation must be done in con-
formance with the applicable co-
des, the requirements of the
standard NF.C.15100 and the re-
quirements of the electrical energy
supplier.
Use a power supply socket that has an
earth connection and this must be con-
nected in conformance with the standard
15100 and the requirements of the suppli-
er of electrical energy. this power supply
socket must be accessible. If the mains
supply cable is damaged, it must be re-
placed by a certified supply cable. This
must be done only by a skilled person,
the seller or the manufacturer. The appli-
ance must not be connected via an ex-
tension cable, a multiple socket or a multi-
ple connector (risk of fire). Make sure the
earthing connection complies with the
regulations in force.
We will accept no responsibility in the
event of accidents or incidents caused by
non-existent or defective electrical earth-
ing connections.
14 www.electrolux.com