AlphaShield Alpha Secure Wireless Router 8350 - Manual (Page 23)

DNS And Advanced Settings:
These Options may be used on all WAN Modes:
? If you have the DNS servers provided to you by the ISP, please select
the Use these DNS Servers.
? Please enter the Primary DNS Server provided by your ISP.
? Please enter the Secondary DNS Server provided by your IS.P
? Use the Default MTU is enabled by default.
? MTU(Maximum Transmission Unit) determines The largest packet size
(in bytes) that the router will send to the WAN. The MTU must be set to
match the MTU settings of your ISP connection. If the router's MTU is
set too high or low network performance can suffer. For an Ethernet
connection, values are 1500 bytes and 1492 bytes for a PPPoE
connection. The Router will use the default value assigned in the MTU window.
? WAN Port Speed is set to Auto by default. You can select the connection type (10 or 100Mbps) if you have trouble connecting the WAN
port.
? Respond to WAN Ping is disabled by default. The Router will not respond to requests from a ping command received via the Internet.
Hackers commonly Use WAN Ping IP addresses to test whether your WAN IP address is valid.
? MAC Cloning Enabled. When this box is checked, The MAC address does not need to be entered manually in the next window. The
WAN port will use the MAC Address of the network adapter in the computer that you are using to access the router.
Version 1.0 Page 23
Alpha Secure Wireless Router 8350 GIGABIT