AEG FAVORIT 60860 - Manual (Page 31)

31
Fault code Å 30 is dis-
played in the multi-dis-
play.
The anti-flood system has
been triggered.
First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.
The control indicator
DOOR is lit. The door of the dishwasher
is open.
Close the dishwasher door.
The control indicator FIL-
TER is lit.
The indicator FILTER is
there to remind you to
check the dishwasher’s fil-
ters occasionally and to
clean them, if necessary. It
lights up at regular inter-
vals, regardless of how
clean the filters are.
The indicator goes out auto-
matically at the start of the
next dishwashing cycle.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in the mains plug.
A fuse in the house’s wiring
system is defective.
Replace the fuse.
For dishwasher models with
a delay start timer:
A start time has been se-
lected.
If the dishes are to be
washed immediately, cancel
the delay start.
Rust spots are visible in
the dishwashing compart-
ment.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially-avail-
able cleaning product for
stainless steel.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
A whistling noise can be
heard when washing dish-
es.
The whistling is not a cause
for concern.
Decalcify appliance with
commercially available
agents for cleaning dish-
washers.
If the noises can still be
heard after decalcifying the
machine, use a different
brand of detergent for
washing cutlery and dishes.
Malfunction Possible cause Remedy