Technical information, 2 how to activate the rinse aid dispenser – Electrolux ESL6552RA User Manual

Page 33

Advertising
background image

Stains and dry water drops on
glasses and dishes
• The released quantity of rinse aid is not

sufficient. Adjust the rinse aid selector
to a higher position.

• The quality of the detergent can be the

cause.

Dishes are wet
• The programme is without a drying

phase or with a low temperature drying
phase.

• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the

cause.

• The quality of the combi detergent tab-

lets can be the cause. Try a different
brand or activate the rinse aid dispens-
er and use rinse aid together with the
combi detergent tablets.

Refer to ‘HINTS AND TIPS’ for
other possible causes.

10.2 How to activate the rinse
aid dispenser

The activation of the rinse aid dispenser
can occur only with the Multitab option
activated.

1. Press the on/off button to activate the

appliance. Make sure that the appli-
ance is in setting mode, refer to ‘SET-
TING AND STARTING A PRO-
GRAMME’.

2. Press and hold buttons (4) and (5) at

the same time until the indicators of
buttons (3), (4) and (5) flash.

3. Press button (4).

• The indicators of buttons (3) and (5)

go off.

• The indicator of button (4) continues

to flash.

• The display shows the current set-

ting.

Rinse aid dispenser off

Rinse aid dispenser on

4. Press button (4) to change the setting.
5. Deactivate the appliance to confirm

the setting.

6. Adjust the released quantity of rinse

aid.

7. Fill the rinse aid dispenser.

11. TECHNICAL INFORMATION

Dimensions

Width / Height / Depth (mm)

596 / 818 - 898 / 550

Electrical connection

Refer to the rating plate.

Voltage

220-240 V

Frequency

50 Hz

Water supply pressure

Min. / max. (bar / MPa)

(0.5 / 0.05 ) / (8 / 0.8 )

Water supply

1)

Cold water or hot water

2)

max. 60 °C

Capacity

Place settings

12

Power consumption

Left-on mode

0.10 W

Off-mode

0.10 W

1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian

energy), use the hot water supply to decrease energy consumption.

ENGLISH

33

Advertising