Allied Telesis AT-2701FTX User Manual

Page 2

Advertising
background image

AT-2701FX/FTX & AT-2746FX

Fast Ethernet Fiber Network Interface Cards (NIC)

STATUS INDICATORS

AT-2701FX
2 LEDs to indicate:
Link/ACT

On for Link
Blink for Activity

FDX

On for Full-Duplex
Off for Half-Duplex

AT-2701FTX/2746FX
2 LEDs to indicate:
10Mbps

On for Link
Blink for Activity
Green for Full-Duplex
Yellow for Half-Duplex

100Mbps

On for Link
Blink for Activity
Green for Full-Duplex
Yellow for Half-Duplex

PC BUS INTERFACE

Bus Interface

PCI 2.2 Compliant

Bus Width

32-bit

Data Transfer Mode

PCI 2.2 Bus Mastering

Power Management Interface

ACPI

DRIVER SUPPORT

Netware 4.2, 5, and 6
Windows 95, 98, ME, XP, NT4, 2000, and 2003
Linux 2.2, 2.4

100MBPS FIBER INTERFACE

Connectors

ST, SC, MT-RJ, or VF-45

Fiber type

Multi-mode fiber

Output Power

Minimum:

-19dB

Typical:

-16.8dBm

Maximum: -14dB

Receive Sens.

Maximum: -31dB

UTP INTERFACE

Connector Shielded RJ-45, MDI

10FL

Connectors

ST, SC

Fiber type

Multi-mode fiber

Output Power

Minimum:

-18.8dB

Typical:

-15.8dBm

Maximum: -13.8dB

Receive Sens.

Maximum: -7.6dB

SELECTION GUIDE

100FX 10/100TX 10FL

AT-2701FX X

- -

AT-2701FTX X X -
AT-2746FX X

- X

POWER CHARACTERISTICS

1A at 5v

ENVIRONMENTAL SPECIFICATION

Operating Temp.

0°C to 50°C

Operating Humidity: 5% to 80% non-condensing
Storage Humidity:

5% to 95% non-condensing

PHYSICAL CHARACTERISTICS

AT-2701FX/FTX
Depth 17.5cm

(6.9")

Height 6.5cm

(2.6")

AT-2746FX
Depth

17.7cm (7")

Height 8.3cm

(3.3")

STANDARDS COMPLIANCE

IEEE 802.3u

100FX

IEEE 802.3u

100TX

IEEE 802.3j

10FL

802.1Q/P

ELECTRICAL/MECHANICAL
APPROVALS

FCC/EN55022 class B
UL
TUV
EN55024
CE

ORDERING INFORMATION

AT-2701FX/AA-xxx

100Mpbs Fast Ethernet fiber
Network Interface Card (NIC)

AT-2701FTX/AA-xxx

100Mpbs Fast Ethernet dual fiber and copper NIC

AT-2746FX/AA-xxx

100Mpbs Fast Ethernet
10Mbps dual port fiber NIC

Where AA = ST, SC, MT-RJ, or VF-45 (for AT-2701FX/FTX)

= SC/SC or ST/SC or ST/ST (for AT-2746FX)

Where xxx = 001 for single unit

= 020 for 20-unit pack

ABOUT ALLIED TELESYN

Allied Telesyn was founded in 1987 with the goal of producing reliable, standards-based
networking products. Focused on Ethernet/IP solutions geared to applications, Allied Telesyn
offers access-edge products like switches, fiber/copper MAPs, and CPE.We’re also a leading
global manufacturer of media converters, unmanaged switches, and NICs. Our customer-driven
approach has made Allied Telesyn the ideal choice for IT professionals looking for high-quality,
feature-rich network solutions at a lower price. Allied Telesyn – It’s Our Network,Too.

www.alliedtelesyn.com

© 2004 Allied Telesyn International Corp. All rights reserved. Information in this document is subject to change without notice.
All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.

617-00474-00 Rev. G

USA Headquarters

19800 North Creek Pkwy, Suite 200, Bothell, WA 98011, USA
Tel 800.424.4284

Fax 425.481.3895

European Headquarters

Via Motta 24, 6830 Chiasso, Switzerland

(Corporate)

Tel (+41) 91 697.69.00

Fax (+41) 91 697.69.11

(European Sales)

Tel (+39) 02 414.112.1

Fax (+39) 02 414.112.61

FAST ETHERNET FIBER NETWORK INTERFACE C ARDS (NIC)

Advertising