Aquatic AI18AIR7242 - Manual

86
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
June 2008
Rough-In Plumbing
Measurements
Note: Serenity tub only models feature a
Pre-leveled ABS Support Base.
21”
42”
38”
72”
68 1/2”
24”
22 1/4”
Deck Width
4 1/2”
42”
Deck Width 4”
48”
24”
SErENITy STudIO 18
SErENITy STudIO
Model # AI18AIR7242 / AI18AIR7242To (Tub only)
GeNeRAl SPecIfIcAtIoNS:
Tub Size 72” x 42” x 24”
189 cm x 107 cm x 56 cm
Bathing Well 48” long
24” wide
22” interior depth
Maximum Water Depth 17”
Shipping Weight
265 lbs. / 97 kg
Tub Weight Filled 1128 lbs. / 428 kg
Tub Only Weight 182 lbs. / 74 kg
Weight w/Equipment 182 lbs. / 97 kg
Gallons to Overflow 114 gal. / 428 L
electRIcAl SPecIfIcAtIoNS:
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
Air Bath System:
- 84 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
Ul & IAPMo listed, factory tested
limited lifetime Warranty
StANdARd eQUIPMeNt:
•
Comfort Pillow - Oval or Rectangle
•
Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
•
Waterproof Remote Control with infrared sensor
and 25’ cord
•
Remote Blower Wiring Kit
• Integral Tiling Flange (Customer must specify which
side(s) should receive flange)
•
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
oPtIoNAl eQUIPMeNt:
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will
be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets
will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
fax-on-demand
document # 1202
3”
11 1/2”
Back Angle 23.7 º