Bosch B30BB830SS - Manual (Page 6)

6
Installation options
There are many different installation options.
These are limited only by the design of the kitchen.
Individual appliance
Individual appliances with partition
 When dimensioning the partition for model 4, note
the thickness of the furniture fronts to prevent
damage if the doors are opened at the same time.
 Use the Heater Kit for Side-by-Side installation if the
gap between the appliances is less
than 6" (160 mm).
See the section on “Required accessories and
tools/Optional accessories”.
 Minimum thickness of the partition 5 /
8
" (16 mm).
Individual appliance at the end of the
kitchen
If one side of the appliance is visible, a side panel must
be used.
The side panel must be connected firmly to the wall, the
floor and overhead cabinet/fixtures before the appliance
is placed in the installation enclosure.
The dimensions of the side panel are taken from the
opposite installation enclosure wall. During installation
ensure that the installation enclosure is square and the
proper size.