Cleaning the metal grease filter, 9 warning, Risk of fire – Bosch HCG56651UC User Manual

Page 10: Notes, In the dishwasher, Note, By hand, Uninstalling metal grease filter, Remove the metal grease filter from its mounting, Clean metal grease filter

Advertising
background image

10

Cleaning the metal grease filter

9

WARNING

RISK OF FIRE
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance without the grease

filter.

Notes

Do not use any aggressive, acidic or alkaline cleaning

agents.

When cleaning the metal grease filters, also clean the

metal grease filter holder in the appliance with a moist

cloth.

You can clean the metal grease filters in a dishwasher

or by hand.

In the dishwasher:
Note:
Slight discoloration is possible when cleaning the

dishwasher. This does not affect the metal grease filter's

functioning.

Do not clean extremely dirty metal grease filters with

dishes.

Loosely position the metal grease filter in the

dishwasher. The metal grease filters must not be

jammed in.

By hand:
Note:
You can use a special grease solvent if soiling is

stubborn. You can order it via the online shop.

Soak the metal grease filters in hot soapy solution.

Use a brush for cleaning and then rinse the filters well.

Allow the metal grease filters to drip dry.

Uninstalling metal grease filter

1.

Open the latch and fold down the metal grease filter.
Simultaneously use your other hand to grasp under

the metal grease filter.

2.

Remove the metal grease filter from its mounting.
Notes

Grease can gather in the bottom of the metal

grease filter.

Hold metal grease filter horizontally to prevent

grease from dripping.

3.

Clean metal grease filter.

Installing metal grease filter

1.

Insert metal grease filter.
Simultaneously use your other hand to grasp under

the metal grease filter.

2.

Flip metal grease filter up and snap the latch into

place.

Troubleshooting

You can often easily eliminate problems that may occur

on your own. Before calling customer service, take into

account the following information.

9

WARNING

RISK OF ELECTRIC SHOCK
Improper repairs are dangerous. Only an after-sales

technician trained by us may perform repairs and

may replace damaged connecting leads. Remove

the mains plug or deactivate the fuse in the fuse box

if the appliance is defective. Call after-sales service.

--------

Disruption

Possible

cause

Solution

Appliance is

not working

Power outage Check whether other

kitchen appliances are

working

Fuse defec-

tive

Check in the fuse box

whether the fuse for the

appliance is in working

order

Lighting not

working.

Bulbs defec-

tive.

Replace bulbs, see

chapter "Replace Bulbs."

Advertising