Specifications, Indication for ipod mode – Alpine cda-9884 User Manual

Page 39

Advertising
background image

37

-EN

• The user has selected a channel number that does not exist or is

not subscribed to.
- The unit will revert back to the previously selected channel.

• There is no artist name/feature, song/program title, or additional

information associated with the channel at that time.
- No action needed.

• If an error or other problem occurs.

- Change channels or consult your Alpine dealer.

• The iPod is not connected.

- Make sure the iPod is correctly connected (refer to

“Connections” on page 40).

Make sure the cable is not bent excessively.

• There are no songs in the iPod.

- Download songs to the iPod and connect to this unit.

• Communication error

- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and this

unit, using the iPod cable.

• Caused by the iPod Software Version not being compatible with

this unit.
- Update the iPod Software Version to be compatible with this

unit.

Specifications

FM TUNER SECTION

AM TUNER SECTION

CD PLAYER SECTION

PICKUP

GENERAL

CHASSIS SIZE

NOSEPIECE SIZE

Due to continuous product improvement, specifications and design

are subject to change without notice.

Indication for iPod Mode

Tuning Range

87.7-107.9 MHz

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity

80 dB

Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

Capture Ratio

2.0 dB

Tuning Range

530-1,710 kHz

Sensitivity (IEC Standard)

22.5 µV/27 dB

Frequency Response

5-20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

Wave length

795 nm

Laser power

CLASS I

Power Requirement

14.4 V DC

(11-16 V allowable)

Power Output

18 W RMS × 4*

*Primary amplifier ratings per CEA-2006 Standard

• Power output: measured at 4 Ohms and 1% THD+N

• S/N: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage

2 V/10 k ohms

Bass

+14/-14 dB at 100 Hz

Treble

±14 dB at 10 kHz

Weight

1.5 kg (3 lbs. 4 oz)

Width

178 mm (7)

Height

50 mm (2")

Depth

160 mm (6-1/4")

Width

170 mm (6-3/4")

Height

46 mm (1-13/16")

Depth

24 mm (15/16")

Advertising