Advantech PCM-3362 - Manual (Page 55)

47 PCM-3362 User Manual
Chapter 4
S
oftware
Introduction
&
Installation
„ Set the timeout value 3000 (3 sec.) in the SET TIMEOUT field and set the delay
value 2000 (2 sec.) in the SET DELAY field, then click the START button. The
Timeout Countdown field will countdown the watchdog timer and display 5000
(5 sec.).
„ Before the timer counts down to zero, you can reset the timer by clicking the
REFRESH button. After you click this button, the Timeout Countdown field will
display the value of the SET TIMEOUT field.
„ If you want to stop the watchdog timer, you just click the STOP button.
Hardware Monitor
CL
When the Monitor application is executed by clicking the button, hardware monitoring
data values will be displayed. If certain data values are not supported by the platform,
the correspondent data field will be grayed-out with a value of 0.
For More detail PCM-3362 software API user manual, please contact your dealer or
Advantech AE. We also include these manuals in this CD.