Anetsberger Brothers FFM-150 - Manual (Page 7)

7
1. Unplug the cord from the receptacle.
2. Disconnect the line from the pump to the filter screen.
3. Remove the filter cover.
4. Remove the filter screen assembly from the filter pan and place on a clean surface for disassembly.
5. Detach quick-connect coupling on drain tube from knurled retaining nut.
6. Detach knurled retaining nut from fitting in screen.
7. Remove filter envelope clip from end of filter screen and folded back end of envelope.
8. Remove filter envelope from filter screen.
9. Clean the filter pan, filter screen and all components thoroughly using a solution of hot water and
detergent. Make sure that all food and breading particles are removed from the pan and from the filter
screen.
10. Dry the pan, the screen and all components completely before starting to reassemble.
11. Follow instructions under FILTER UNIT PREPARATION to install new filter envelope.
REPLA REPLA REPLA REPLA REPLACING CING CING CING CING THE FIL THE FIL THE FIL THE FIL THE FILTER P TER P TER P TER P TER PAPER APER APER APER APER
If the filter paper becomes torn, or if the time to filter the oil from one unit becomes excessive, it is time to
replace the Filter Envelope.
The oil soaked filter envelope may still be very hot and could cause burns.
WARNING
DANGER
Make sure the filter pan has cooled completely to room temperature before
attempting to change the paper.
! !
WARNING
Only use filter paper envelopes from Anetsberger Brothers that have been specifically
designed for this filter system. Using the wrong type of filter paper can cause damage
to the pump system, and will void the Warranty