Advantech AIMB-256 - Manual (Page 36)

AIMB-256 User Manual 30
1.8.15 Serial SATA Connector [Black] (SATA1, SATA2, SATA3)
1.8.16 USB 2.0 Connector (USB3, USB4, USB5)
These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to
any of these connectors, then install the module to a slot opening at the back of the
system chassis. These USB connectors comply with USB 2.0 specification that sup-
ports up to 480 Mbps connection speed.
SATA1
SATA2
SATA3
Note! ! Install the Windows® 2000 Service Pack 4 or the Windows® XP
Service Pack1 before using Serial ATA.
! When using the connectors in Standard IDE mode, connect the pri-
mary (boot) hard disk drive to the SATA1 connector.
Caution! ! Please DO NOT use IDE1 and SATA2 at the same time. This is an
incompatible conflict.
SATA3
SATA2
SATA1
1
1
1