Audiovox MOVIES 2 GO MM170R - Manual (Page 3)

Return
Brig htness 53
Contrast 50
Saturatio n 50
Hue 50
3. Press "w " to enter the desired submenu. Press "v " or "w " to access each of the
adjustments. Press to adjust, then press "w " again to exit. Then press SETUP to exit
main menu.
Sele ct Move MENU + -
USER
Using the remote control press the arrow button on the right to increase the adjustment or
the arrow button on the left to decrease the adjustment. The brightness, contrast, saturation
and hue can be adjusted from -50 to +50. To access each of the adjustments, press the MENU
button. Once the desired adjustment is reached use the right or left arrow buttons. If RESET is
selected, pressing the right arrow button will reset the monitor to factory settings.
Remote Control
MONITOR MOBILE
ESC
MENU
INPUT
LCD REMOTE
1
2
4
6
3
5
1. POWER On/Off Button: Turns the monitor on or off.
NOTE: There is a short delay after pressing the power button until video appears on the
screen.
2. Input Video Switch Button : Selects the video source AV1*.
3. MENU Button: This button is used to display the OSD and access the video adjustments.
4. Right Arrow Button: This button is used to increase the video adjustment parameters.
5. Left Arrow Button: This button is used to decrease the video adjustment parameters.
6.ESC Button: Used to turn off the OSD.
*AV2 is not used on this model