Ativa DXC240C - Manual (Page 5)

5 Illustration is for reference only.
How to Use Your Shredder
Setup - Tilt / pullout basket models
Install casters on bottom of unit (if applicable). Mount the shredder head securely on the
rim of the cabinet. Insert the inclined receptacle into the cabinet. The elevation on the
front side underneath the receptacle must be fixed exactly inside the corresponding cavity on
the bottom of cabinet. Close the receptacle by simply pushing it toward the cabinet. Connect
the power cord to any standard 120 volt AC outlet.
Note: Some shredders include a built-in safety mechanism that requires the shredder to be cor-
rectly mounted on the supplied wastebasket and the pullout basket to be completely closed.
Lining the wastebasket with a plastic bag will interfere and may keep the shredder from func-
tioning properly.
Caution: All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the cabinet.
If your shredder came with casters, they may need to be installed by inserting the pegs into the
four holes on the bottom of the cabinet.
Feed Opening
LCD Screen
Pullout Basket
SPECIFICATIONS:
Shredding Capacity Shred Type Shred Size Throat Width
DSC200C
DXC160C
DXC240C
20 Sheet
16 Sheet
Stripcut
Crosscut
6 mm
0.24 in
4 mm x 30 mm
0.16 in x 1.18 in
240 mm
9.45 in
240 mm
9.45 in
24 Sheet Crosscut
4 mm x 40 mm
0.16 in x 1.57 in
240 mm
9.45 in