AEG KO-LAVAMAT 70630 - Manual (Page 41)

Installation and connection instructions
41
Installation of the appliance
3 Washing machines with curved panels are not suitable for installing
under units.
Transporting the appliance
• Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
• Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.
• Lift the appliance neither by an open filling door nor by the base.
• When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.
Remove transportation protection
Important! It is essential to re-
move the transport safeguard be-
fore putting the unit into
operation. Keep all parts of the
transport safeguard in a safe
place for possible later transport
(moving).
0 1. Open both hose holders on the
unit's rear side and remove the
hoses and mains cable.
2. Pull both hose holders off the
unit with a strong pull.