Audiovox PC 3220 - Manual (Page 17)

16
When no signal is available, the antenna symbol will change to red and the bars will be dimmed.
When this occurs, no connection is possible for one of the following reasons:
• You are outside of a CDMA network coverage area
• The signal strength is too weak
• A network problem is preventing the PC3220 from obtaining service
• The Mobile Connection Manager is not turned on or the PC3220 has not been inserted
• The antenna is not raised to a 90° angle
Service Indicator
or
The Service Indicator icon displays which network service is currently available at your location,
the Express Network
SM (1xRTT) or the Quick 2 Net Network SM (14.4kbps).
Express Network
Connection This default icon signifies that the Express
Network is available (even if Quick 2 Net is
also available)
Quick 2 Net Connection This icon signifies that only the Quick 2 Net
network is available
Note: The Express Network (3G) icon will appear even if the Quick 2 Net (2G) network is also
available.
data call: similar to making a voice call, a data call is the term used when you
access the Internet. Express Network data calls go dormant when the Internet
activity is inactive for ~30 seconds. When a data call goes dormant, you are not
being charged for airtime. Quick 2 Net calls do not go dormant.
Data Compression
The Data Compression icon appears when the Fourelle Venturi 2.1 data compression tool is
active.
When the Data Compression icon is dimmed, the Fourelle Venturi 2.1 application is inactive.
See Settings to learn about enabling and disabling this utility.
Roaming Status
The Roaming Status icon indicates the roaming status of your PC3220. When the indicator is
“on” (solid black) you are roaming within a “preferred” roaming area. When the icon is blinking,
you are roaming within a CDMA network, but not in a “preferred” zone.
No service The icon is dimmed when no service is
available