Aluratek AEBK07FS - Manual (Page 3)

Return button – press once to return to previous menu, press
and hold to return to Home menu
Earphone jack
Mini USB jack – for data transfer and charging
SD cart slot – supports SD/SDHC/MMC card
DC jack – for charging
LED indicator
Speaker
Power On and Off AEBK07FS

Press and hold the [Power] button for 3 seconds to turn on
AEBK07FS.

When AEBK07FS is on, press and release the [Power] button for
standby mode, press and release the [Power] button again to
return to power on mode.

To turn off AEBK07FS, press and hold the [Power] button for 3
seconds.
Charging AEBK07FS
The battery is not fully charged and it is highly recommended that you
charge your LIBRE before you begin using it.
Note: Using the LIBRE “out of the box” will not harm the device. You
will experience reduced battery life as the unit will not be fully
charged.
Connect the power adapter to the LIBRE’s USB port and you will see
an animation of a battery charging on the LIBRE’s display. Please
charge the battery for a minimum of six (6) hours using the power
adapter. You may also charge the battery by connecting your LIBRE to
the USB port of your PC using the USB cable included with your LIBRE.
However, using this method will extend the charging time to
approximately twelve (12) hours.
12
13
14
15
16
17
18
Getting Started