Components, Ce-300l (local unit) front view – ATEN CE-300 User Manual
Page 13
1. Introduction
5
Components
CE-300L (Local Unit) Front View
No.
Component
Description
1
KVM Port Section
This section is made up of a microphone jack, speaker
jack and KVM (keyboard, video, mouse), data connector.
The cable that links the CE-300L to your local KVM
console plugs in here. Only KVM cables designed to work
with this switch can plug in (see Cables, page 3, for
details).
2
LEDs
The Local Unit has two LEDs to indicate the operating
status of the Local and Remote units (see page 11 for
details).
3
Firmware Upgrade
Port
The Firmware Upgrade Cable that transfers the firmware
upgrade data from the administrator's computer to the CE-
300L plugs into this connector.
4
Operating Mode
Selection Switch
Pressing this switch cycles through the operating mode
choices:
Auto: Both consoles can control the system(s);
Local: Only the local console can control the system(s);
Remote: Only the remote console can control the
system(s).
1
2
3
4