Accton Technology SUPERSMART ETHERHUB-16SE - Manual (Page 6)

About this Guide v
About this Guide
This is an installation guide for Accton’s SuperSmart Ethernet
Hub. It covers the following topics:
ì
Hardware description and summary of features
ì
Hardware installation procedure
ì
System setup and configuration
Package Checklist
Carefully unpack the contents of the package and verify them
against the checklist given below.
æ EtherHub-16se (Model No. EH2051)
æ One AC power cord
æ 0.5 meter FlexBus 1500

cable
æ Four rubber feet
æ BNC T-type connector and two 50-ohm (
Ω
) terminators
(for models with the BNC transceiver module only)
Please inform your dealer immediately should there be any
wrong, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use them again to
repack the unit in case there is a need to return it for repair.
To qualify for product updates and product warranty
registration, fill in the
Owner Registration Card and return it
to Accton Technology Corporation.